![[Image]](cm3414.jpg)
![[Image]](cm3410.jpg)
![[Image]](cm3410p.jpg)
PDF INSTRUCTION SHEET
Distribution Amplifiers
A Distribution Amplifier is a type of amplifier that is mounted indoors, usually in a central location, and is used to "distribute" signal to multiple locations. In areas with very weak signals you would need to use a pre-amplifier first to boost the signal levels up to a point where they can be distributed.
Distribution amplifiers are available in many configurations. There are distribution amps designed to cover just off air frequencies and those designed to cover off air and cable frequencies. Channel Master offers the following types of distribution amplifiers: Single output models, Multiple output models (2, 4, and 8 outputs), Broadband models (covers wide range of frequencies, ie...50 to 900 MHz), and Split Band models (designed to cover select frequencies, ie...VHF, 54 - 216 MHz; UHF, 470 to 900 MHz)
Apartment Complex Amplifiers, ACA-35-1000 3044, HDA-200, HDA-100, TV SIGNAL DISTRIBUTION, Cable tv amplifier, Drop Amplifier with passive return path for data, PICO MACOM, TA-25, TA-52, TA-36, RG6. STARKELECTRONIC.COM HOME PAGE with product search
INFORMATION ABOUT DIGITAL OFF AIR MATV SYSTEM SETUP
CHANNEL MASTER MATV PRODUCTS
Channel Master NEW #3410 Amplifier, ultra mini, one output, 15 dB, 50 to 1002 MHz, with return path (PCT-MA2-M) Replaces CM 3042
Channel Master NEW # 3412 INDOOR DISTRIBUTION AMP with 11.5 dB gain on ea of 2 Output $27.95
Channel Master NEW # 3414 Replaces CM #3044 4-WAY 54-1002 mhz INDOOR DISTRIBUTION AMP with return path WE ARE SOLD OUT OF THE 3418 until Mid MARCH
You
May be able to get a 3414 at this
Link
Channel Master NEW # 3418 Replaces CM #3045 8-WAY YouTube VIDEO WE ARE SOLD OUT OF THE 3418 until Mid MARCH
You
May be able to get a CM 3418
here
CM #7034C 33dB WIDE BAND(50-550 MHZ) AMPLIFIER 1 in and 1 out DISCONTINUED USE CM 7722 or BT ACA35-1000
CM #7054C 44dB WIDE BAND(50-550 MHZ) AMPLIFIER 1 in and 1 out DISCONTINUED USE BT Z C M - 4 8 - 5 5 0
MORE INFO ON 7020, 7034, 7054 >>>
CM #7335C V-U-FM 33dB DIST. 1 in 1 out AMPLIFIER DISCONTINUED USE CM 7722 OR BT ZTA35 BT # ZTA-35 BROADBAND U/V/FM DIST. AMP. 35dB SALE $111.66 LIST $203.05
WINEGARD DISTRIBUTION AMPLIFIERS
DA-1118
single stage 18db amp for 40Mhz to 1000Mhz good for small CATV/MATV
and home TV signal distribution on DISCONTINUED USE HDA-100 or HDA-200
DA-1018 TOP QUALITY push-pull 18dB amp for 40Mhz to 1000 Mhz for use in small to medium CATV/MATV systems.DISCONTINUED USE HDA-100 or HDA-200
DA-1127 26db amp for 40Mhz to 1000Mhz for medium CATV/MATV systems. DISCONTINUED USE HDA-200
DA-1136 single stage 37db amp for 40Mhz to 1000 Mhz for use in medium to large CATV/MATV systems. Variable gain control.DISCONTINUED USE HDA-200 OR AMP-36G Shown Below
HDA-200 Distribution Amplifier $61.43
The HDA-200 has a single RF input, 24 dB gain, single RF output, with a 5-42 MHz 2-way bi-pass at +12 dB gain. The HDA-200 has 0-18 dB gain control and 20 dB “switchable” FM trap to eliminate those offending FM radio stations. These features, when combined with the 12 dB of amplified gain for the 2 way 5-42 MHz return path make the HDA- 200 a superior solution for the “Techno” savvy consumer.
HDA-100 Distribution Amplifier
The Winegard HDA-100 is a single RF input, 15dB gain, single RF output, with a 5-42 MHz 2-way bi-pass at -2 dB loss.
MORE INFORMATION Winegard Ultra Low Noise HDTV2 Distribution Amplifiers
WINEGARD PUSH-PULL SYSTEM AMPLIFIES. This is the best amp to use when you are trying to boost signal on a system that has lots of channels on it. The Push-Pull amp is more stable when you have lots of channels.
DA-1036 DISCONTINUED USE
BLONDER TONGUE ACA-35-1000
Designed for use in medium to large CATV/MATV systems 37 dB Gain from
40 MHz to 1000 MHz. Variable gain control and selectable FM trap provide
excellent system configuration qualities. Noise figure, Gain VSWR and all
other specifications are carefully engineered to maintain the highest signal
qualities. Features PUSH-PULL circuitry. Designed for maximum stability and
housed in a sturdy extruded aluminum giving excellent heat dissipation and
years of maintenance free service.
DA-1018 TOP QUALITY push-pull 18dB amp for 40Mhz to 1000 Mhz for use in small to medium CATV/MATV systems. Variable gain control. on Discontinued use DA1118
OTHER WINEGARD DISTRIBUTION AMPLIFIERS>>>>>
Apartment Complex Amplifiers ACA Series
A C A - 3 5 - 1 0 0 0 $195.10
The ACA-35-1000 is a quality, broadband, indoor distribution amplifier, designed for RF distribution systems, such as apartment complexes, hospitals, schools, prisons, and hotels. This amplifier is ideal for those RF distribution systems whose input source is a "cable drop", the output of a MAT V / S M ATV headend, or the output of a small CATV headend.
The ACA-35-1000 amplifier has flat 35 dB of operational gain, which is variable using a built-in gain control. T h e s e amplifiers use a push-pull discrete amplifier stage, capable of delivering high output levels with low distortion, even in systems with 110 channels of programming.
The A C A -35-1000 is housed in a compact, aluminum chassis that provides excellent heat dissipation. This allows the ACA-35-1000 to be operated at high ambient temperatures with no degradation of performance or reliability. T h e A C A Series is provided with an external power transformer for use with 117 VAC power.
![[Image]](btaca35.jpg)
FEATURES
ACA-35-1000
One-Way Operation - 40 to 1000 MHz Push-Pull Discrete Amplifier Stages for High Output with Low Distortion Low 40 MHz Band Edge Built-in Variable Gain Control Surface Mount Design
40-1000 MHZ Amplifiers TV ANTENNA or CABLE TV SIGNAL DISTRIBUTION
AMP-18G $49.95
AMP-36G $59.95 YouTube VIDEO
AMP-25GT 25 dB Distribution amp with gain and tilt control $29.95 Gives that HD signal that extra boost on long cable runs. Mount it in front of a splitter in multi set systems or you can mount it near a TV that is at the end of a long cable run.
DESCRIPTION:
1GHz CATV DISTRIBUTION AMPLIFIERS 25db Gain For CATV or OFF AIR TV ANTENNA SIGNAL
Designed for use in small CATV system with Gain and Tilt control
Specifications: Gain 25 dB * Gain Control 0-10 dB * Max.Output 40 dBmV * Bandwidth 54-1000 MHz * Noise Figure 6.5 dB * Power Requirements 115 VAC, 60Hz, 4 W
THIS UNIT IS ON BACK ORDER AT THIS TIME
AM-20UV 20 dB U/V/FM SLOPED amplifier with TILT control
View Cart BANDWIDTH 54-890 MHz * GAIN 20 dB * MAX INPUT 20 dBmV WITH VHF 7 CHANNELS 11 dBmV 4 CHANNELS * NOISE 5 dB VHF 7 dB UHF* TILT 0-10 dB
THIS IS A LOW COST AMP YOU CAN USE IN AN ANTENNA OR CABLE SYSTEM AS LONG AS YOU ARE NOT TRYING TO AMP A SIGNAL THAT IS ALREADY STRONG. THIS AMP WILL BOOST UP A WEAK SIGNAL CAUSED BY LINE LOSS BUT IF YOU TRY TO PUT IT AT THE BEGINNING OF A LINE WHERE THE SIGNAL IS STILL STRONG YOU MAY OVERLOAD THE AMP AND END UP WITH A WORSE PICTURE. TV AMPS ARE LIKE REAL ESTATE LOCATION MATTERS
AM-125 Home U/V - FM Distribution Amplifier (With FM trap)
Specifications : Bandwidth - 54-890 MHz * Gain 22dB * Max. Input: VHF 7-Chs. - 20dBmV * Max. Input: UHF 7-Chs. - 11dBmV * Noise Figure - 5dB VHF / 7dB UHF * FM Trap - Yes * Power Requirement - 17 VAC, 60hZ
AM-125 25 dB U/V/FM amplifier $14.95 plus shipping
UHF/VHF/FM with FM TRAP Switch
LINKS TO BLONDER TONGUE DISTRIBUTION AMPLIFIERS
Broadband Hybrid A m p l i f i e r s. . . . . . . . . . . . . . . .. . . . . . . . .F 1-1
Broadband Distribution A m p l i f i e r s. . . . . . . . . . . . . . . . . . . . .F 2-1
Line Extenders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F 3-1
Low Cost Broadband A m p l i f i e r s. . . . . . . . . . . . . . . . . . . .
Low Cost Broadband Distribution Amplifiers ZTA & ZCM Series . .F 4-2
PICO TV signal distribution amplifiers
PICO MACOM TA-36 TRU SPEC UHF/VHF/FM 36 dB DISTRIBUTION AMPLIFIER $99.95
View Cart The TA-36 Designed for medium-sized MATV system providing the user with separate VHF High, VHF Low and UHF band gain controls. The dual switchable FM trap allow use in the strongest FM signal area.
Features:
Two switchable FM traps * Separate gain controls * AC power indicator * -20 dB monitor output * 50 dB output capability
Applications:
Medium size MATV system distribution
Gain: 54-108 MHz 31 dB * 470-812 MHz 36 dB
Noise Figure 5dB VHF , 7dB UHF
Gain Control 15 dB
Switchable FM Traps: SW-1 (88 to 96 Mhz) -20dB, SW-2 ( 95 to 108 Mhz ) -20 dB
PICO MACOM TA-25 TRU SPEC UHF/VHF/FM 25dB DISTRIBUTION AMPLIFIER $29.95
The TA-25 is a broadband amplifier providing continuous amplification from 54 to 890 MHz, making it ideal for signal distribution in small MATV systems. The switchable FM trap has been included to prevent overloads due to strong local FM stations.
Features:
Amplifies UHF , VHF, FM, Mid & Super bands * Switchable FM trap * 25 dB gain * Low Noise * Lightning protection * low cost
Applications:
Small MATV system distribution * Amplification of Mid & Super bands * Amplification where strong FM is present
Gain: 54-300MHz 25dB * 300-806 MHz 22dB * 900 MHz 18dB
Noise Figure 5dB VHF , 7dB UHF
TA-52 UHF-VHF-FM 52 dB TV DISTRIBUTION AMPLIFIER $249.95
The TA-52 is a 52 dB gain UHF/VHF/FM broadband distribution amplifier designed to function as a reliable, key component in a medium and large MATV systems. Signal control is provided through front panel design. UHF/VHF input may be combined or separated by use of a single throw switch. Low band VHF, High band VHF and UHF frequencies have separate gain controls and switchable 10 dB input attenuators. Features include switchable FM trap and backmatched -20 dB test point.
Features:
60 dB output capability * Switchable input attenuators * Output monitor test points * Independently adjustable VHF-HIGH, VHF-LOW & UHF gain * Separate or combined inputs
BACK TO PICO MACOM PAGE >>>>
PAGE #10 F TYPE CONNECTORS, for RG6, RG59 and RG11, ground Block, DC Voltage block, right angle adapters, 75 ohm terminators, F Inline splice
PAGE #11 Compression Seal F TYPE CONNECTORS , Tools, SPLICES AND INTERSERIES ADAPTORS also Compression installation Tool.
1000-Ft RG6 Coaxial Cable (Black, Pull Box)
Model No.: ULPVRG6-1000
Retail Price: $119.99 SALE PRICE $59.95 per 1000 ft
SPECIFICATIONS : UL listed * Swept tested to 3000 Mhz * 60% aluminum braid * 100% foil-shielded PVC jacket
FOR ALL TV ANTENNA PAGE>>>>>
FOR ALL TV ANTENNA PREAMPS (BEST WAY TO IMPROVE YOUR PICTURE QUALITY)>>>
RETURN TO CM INDEX PAGE
FOR MORE ELECTRONIC PRODUCTS
RETURN TO STARKELECTRONIC.COM HOME PAGE with product search
TO SEND US AN E-MAIL CLICK HERE or GO TO THE HOW TO ORDER PAGE
STARK ELECTRONIC
444 FRANKLIN ST. WORCESTER, MA.
CALL 508-756-7136 FAX 508-756-5752 MON-FRI 8:30-5PM EASTERN TIME
TO ORDER PHONE, FAX, OR We also have a secure way you can send payment online via PayPal
WE SHIP UPS ANYPLACE IN USA
WE ACCEPT
SEE OUR NEW CLOSE OUT SALES PAGE