Model
869
48 Pin Stand-Alone Universal Programmer
The
B+K Precision model 869 Stand Alone Programmer was designed to operate by
itself to perform functions such as Copy, Edit Buffer, Read, Blank check,
Erase and Test of some standard chips. It comes with an internal CPU, 7 key
keypad, 16x2 LCD display, and flash memory for programming data and algorithms.
Standard data buffer size is 4 Mbits. Programming algorithms can be downloaded
from the PC host via printer port, which will stay inside the memory until
re-flashed. Flash memory can store more than 30 algorithms at one time. The
application is ideal for volume programming or field service operations.
The unit can also operate as a PC programmer. Connected to a Parallel port
is provides full programming features such as Program, Read, Verify, Blank
Check, Buffer Edit, Vector test, etc. Stream-lined file and buffer data
management, chip selection and other features are provided as a standard.
Programming algorithms for more than 3,000 devices are provided.
Features
-
48 Pin DIP ZIF socket universal
pin-drivers
-
Auto-run mode starts programming
automatically upon detection of chip insertion
-
Supports down to 1.8V low
voltage devices
-
Supports Windows2000/NT/9x
(XP compatible)
Physical
Specifications
-
Power supply: Input 100V-240VAC,
Output 12VDC/2Amp
-
Programmer Dimension: 200(L)
x 140(W) x 24(H) mm
-
Package: 263(L) x 232(W)
x 100(H) mm
-
Shipping Weight: 6 LB
Model 865
discontinued
Universal Device Programmer
Specifications
-
48-pin
DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up
to
48-pin
-
No
adapters required for any DIP
devices
-
High
speed
programming
-
Comfortable
control program - Windows
95/98/2000/Me/NT/XP
IC
Tester
-
TTL
type: 54, 74 S/LS/ALS/H/HC/HCT series
-
CMOS
type: 4000, 4500 series
-
Static
RAM: 6116..624000
-
User
definable test pattern generation
Package
support
-
Package
support includes DIP, PLCC, SDIP, SOIC, PSOP and other
-
Support
all devices in DIP with default socket
-
Support
devices in PLCC28, PLCC32 and PLCC44 with universal
adapter
-
Compatible
with third-party adapters for non-DIP support
Note: Direct all questions concerning special Package
Adapters for programmers to
Tech@bkprecision.com.
8-Socket Module for
Multiprogramming
-
EPROM/EEPROM/Flash
compatible pindriver (8x)
-
Pindrivers
are independent, therefore defective chip haven't influence to another programmed
chips
-
TTL
pindriver meet EPROM/EEPROM/Flash requirements
-
Current
limitation for each socket, overcurrent shutdown, power failure
shutdown
-
Banana
hole for ESD wrist straps
-
Insertion
test
-
Part
Number: 70-0104
Model 864 $719
Universal Device
Programmer
Specifications
-
48-pin
DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up
to 48-pin
-
No
adapters required for any DIP devices
-
High
speed programming
-
Comfortable
control program - Windows 95/98/2000/Me/NT/XP
IC
Tester
-
TTL
type: 54, 74 S/LS/ALS/H/HC/HCT series
-
CMOS
type: 4000, 4500 series
-
Static
RAM: 6116 .. 624000
-
User
definable test pattern generation
Package
support
-
Package
support includes DIP, PLCC, SDIP, SOIC, PSOP and other
-
Support
all devices in DIP with default socket
-
Support
devices in PLCC28, PLCC32 and PLCC44 with universal
adapter
-
Compatible
with third-party adapters for non-DIP support
Note: Direct all questions concerning special Package
Adapters for programmers to
Tech@bkprecision.com.
Model 844A
Universal, ISP Cable
Programmer
ZIF
socket,
pindriver
-
40-pin
DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up
to 40-pins
-
Pindriver:
40 TTL pindrivers, universal GND/VCC/VPP pindriver
-
FPGA
based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver
pins, level H selectable from 1.8V up to 5V
-
In-circuit
serial programming (ISP) capability included
-
Continuity
test: each pin is tested before every programming
operation
IC
Tester
-
Static
RAM: 6116.. 624000
Package
support
-
Package
support includes DIP, PLCC, SDIP, SOIC, PSOP and other
-
Support
all devices in DIP with default socket
-
Support
devices in PLCC28, PLCC32 and PLCC44 with universal
adapter
-
Compatible
with third-party adapters for non-DIP support
Note: Direct all questions concerning special Package
Adapters for programmers to
Tech@bkprecision.com.
Model 848
Universal, ISP Cable
Adapter
ZIF socket
pindriver
-
Supports Low Voltage devices from 2.0V and
up
-
TTL driver provides H, L and reads for all 32
pins
IC
Tester
-
Static
RAM: 6116.. 624000
Package
support
-
Package
support includes DIP, PLCC, SDIP, SOIC, PSOP and other
-
Support
all devices in DIP with default socket
-
Compatible
with third-party adapters for non-DIP support
Note: Direct all questions concerning special Package
Adapters for programmers to
Tech@bkprecision.com.
Model 861
Serial EEPROM
programmer
 ZIF socket,
pindriver
-
ZIF
(Zero Insertion Force) DIL socket (300mil wide)
-
Each
pin is possible to set in position Low and H/Pull-up
-
From
each pin is possible to read
-
Support
of Low Voltage devices
Model 862
MCS51 series and Atmel AVR microcontrollers
programmer
ZIF socket,
pindriver
-
40-pin
DIL ZIF (Zero Insertion Force) socket accepts both 300/600 mil devices up
to 40-pin
-
Specialized
GND/VCC/VPP pindriver for MCS51 and AVR devices
-
Specialized
TTL driver provides H, L and read to all necessary pins
|
