![[Image]](pict34d.jpg)
FOR PRICES SEE PRICE SHEET
The GALAXY III Series includes high performance, consumer quality, antenna preamplifiers. These units are designed to mount on the antenna mast and are ideal for home use. The GALAXYIII Series features a modern design, a high impact polypropylene case and simplified mounting. A compact indoor transformer and power added are included with all models. Many models are available, including units for VHF, UHF combined UHF/VHF, 300 or 75 ohm outputs, and units with dual 75 ohm outputs. Each preamplifier is individually packaged in a display box and includes complete mast mounting hardware.
The GALAXY III PLUS Series includes high performance, consumer quality, antenna pre-amplifiers. These units are designed with a two unit amplifier, consisting of a low noise, mast-mounted preamplifier and a high output, indoor, post amplifier power supply. This arrangement allows each component to be optimized for its particular function and results in the best possible system performance. The GALAXY III Series feature lightning and surge protection and include complete mast mounting hardware.
N O T E :
The GALAXYIII and GALAXYIII PLUS Series preamplifiers employ a cut-off filter at the low band input to reduce interference from strong local FM transmitters. This approach deliberately reduces the FM band gain therefore, the GALAXY III and GALAXY III PLUS Series will pass FM for most stations, but will not be suitable for weak signal FM.
FEATURES
GALAXY III SERIES
VHF, UHF, and VHF/UHF Models
Low Noise Figure
Split Band Amplification (LB VHF, HB VHF, UHF)
High Band VHF Signal Interference with
Low Band VHF and Optimizes Dynamic Range
Dual Output Port Models Employ Built-in Splitter
for Feeding Two Television Sets Off One Preamp
Single or Dual Input Port Models Accommodate
Separate or Combined UHF/VHF Antennas
Lightning and Power Line Surge Protected
Mast Mounting Hardware Included
J 1 - 1 Consumer Broadband Preamplifiers
GALAXY III, GALAXY III PLUS & AB-300/RP-300
ORDERING INFORMATION:
AB-300/RP-300 Stock No. 4939
GALAXY III PLUS SERIES
VHF and VHF/UHF Models
Low Noise Figure
Designed for Multi-Set Homes or MATV System Use
High Gain Post Amplifier Permits Relatively Long
Cable Runs from the Antenna
The AB-300/RP-300 is high quality antenna preamplifier/power supply system, designed for long downlead installations. These units are ideal for those applications requiring TV signal preamplification in a remote location far from available power sources. This system consists of the AB-300, a mast mounted preamplifier, and the RP-300, and indoor power supply/power inserter. The AB-300 has a 300 ohm twinlead input and both 300 ohm twinlead and 75 ohm coaxial outputs. The RP-300 has corresponding 300 ohm and 75 ohm inputs, 300 and 75 ohm outputs, and a jumper for selecting either 300 ohm or 75 ohm downlead. Apower selector jumper is also included which permits the installer to select enough voltage to overcome the DC loop resistance of the downlead. The length of the antenna downlead is limited only by its RF attenuation not by its power supply voltage drop. The RP-300 delivers a nominal 30 VAC output for powering the A B - 3 0 0 .
FEATURES
VHF/FM Preamplifier and Power Supply
Extra High Gain
Very High Output Preamplifier for Use with Long Downleads
Supports 300 W Twinlead or 75 ohmCoaxial Cable Connections Between
Mast-Mounted Preamplifier and Power Supply
GALAXY SERIES
See Chart For Ordering Information
NEW BT INDEX PAGE
OTHER TO BT PAGE ( THE OLD ONE WITH JPG SCANS OF THEIR CATALOG)
FOR MORE ELECTRONIC PRODUCTS
RETURN TO STARKELECTRONIC.COM HOME PAGE
TO SEND US AN E-MAIL CLICK HERE
STARK ELECTRONIC
444 FRANKLIN ST. WORCESTER, MA.
CALL 508-756-7136 FAX 508-756-5752 MON-FRI 8:30-5PM EASTERN TIME
WE SHIP UPS ANYPLACE IN USA
WE ACCEPT

![]()

We also have a secure way you can send payment online via PayPal