BLONDER TONGUE BTY FM Antennas AND Antenna Mounts

B 1 - 4

[Image] FM ANTENNA

BT #BTY-2-FM TWIN DIPOLE, OMNIDIRECTIONAL FM ANTENNAINFO

The BTY-2-FM is a professional quality, FM band antenna designed specifically for FM reception applications. This antenna covers the entire FM band from 88 to 108 MHz using two half-wave dipole elements mounted 90° to one another. This design gives the BTY-2-FM an omnidirectional (360°) reception path.

The BTY-2-FM is supplied complete with two dipole elements, an 18" square boom, universal mounting bracket and connector cable. The heavy duty mounting bracket is designed for either vertical or horizontal tower members and will attach to masts up to 2.5" inches in diameter. The BTYSeries Antennas can accommodate a maximum mast size of 2.5" O.D. (outside diameter). These antennas feature a 75 W type "F" connector to provide feed on coaxial cable down leads.

BTY-2-FM Stock No. 4878

FEATURES:

Full 88-108 MHz Coverage * 360° Beamwidth * Fiber Filled Elements Dampen Vibration

SPECIFICATIONS BTY-2-FM

ELECTRICAL

Gain Over Isotropic: 2 . 2 d B i

B a n d w i d t h : 8 8 - 1 0 8 M H z

Beamwidth (-3 dB): 360° azimuth °

MECHANICAL

B o o m : 6063-T6 alum. tube 1.25" square, 0.062" wall Boom Length: 1 8 . 0 i n .

Number of Elements: 2

E l e m e n t s : 6063-T52 alum. tube 0.5" round, 0.049" wall

Maximum Element Wi d t h : 5 9 . 0 i n . Turning Radius: 2 9 . 0 i n .

O p e r a t i o n a l / S u r v i v a l Wind Ve l o c i t y : 1 2 5 m p h

Output Connector: Type "F", female, weather sealed

Max.Mast Diameter (O.D.): 2 . 5 "

[Image] BTY-C-MOUNT Stock No. 5760

BTY-C-MOUNT CANTILEVER ANTENNA MOUNT

FEATURES:

Antenna Cantilever Mount - Allows Antennas to Mount Directly to Tower Maximizes Signal Reception By Keeping Elements Clear of Support Structures Vertical or Horizontal Mounting

BTY-C-MOUNT

ANTENNA MOUNT

The BTY-C-MOUNT consists of a heavy duty square aluminum boom and all clamping hardware required for rear mounting of the following BTYSeries Antennas; BTY-5-LB , BTY-10-HB , BTY-LP-LB , BTY-LP-HB and BTY-LP-BB . Cantilever end-mounting is commonly used since the antennas are usually attached to tower legs rather than to masts. This maximizes the signal reception qualities of the antenna by keeping elements clear of support structures. It also eliminates the need for outriggers and masts. Antennas can be mounted horizontally or vertically on a tower leg or mast (1.25" to 2.5" OD) by rotating the mounting plate 90°. The BTY-C-MOUNT is designed to mount parallel to and below the antenna boom.

SPECIFICATIONS BTY-C-MOUNT

MECHANICAL # 5 7 6 0 U n i t s

B o o m : 6063-T6 alum. tube 1.25" square, 0.062" wall

Boom Length: 6 3 . 3 8 i n .

Mounting Plates 14 gauge (0.074")

and Brackets: stainless steel

[Image] BTY-MC Stock No. 4879

BTY-MC STACKING FRAME ANTENNAMOUNTING CLAMP

FEATURES:

Stainless Steel Antenna Mounting Clamp Allows Stacking of BTY Series A n t e n n a s

B T Y- M C ANTENNA MOUNT

The BTY-MC is a heavy duty, stainless steel antenna mount-ing clamp designed for stacking BTYSeries Antennas. The resultant antenna array improves antenna gain for use in fringe areas. The BTY-MC has excellent weathering proper-ties and exceptional strength. The number of clamps needed is dependent on the number of antennas stacked (i.e. 2 anten-na array uses 3 clamps, a 4 antenna array uses 6 clamps). The BTY-MC is shipped completely pre-assembled and has a compact design for ease of mounting.

SPECIFICATIONS BTY-MC MECHANICAL # 4 8 7 9 U n i t s

M a t e r i a l : Stainless Steel

Mount Dimensions 6 x 6 x 1.38 i n .

U - B o l t s Q u a n t i t y : 4

NEW BT INDEX PAGE

FOR PRICES SEE PRICE SHEET

OTHER TO BT PAGE ( THE OLD ONE WITH JPG SCANS OF THEIR CATALOG)

FOR MORE ELECTRONIC PRODUCTS

RETURN TO STARKELECTRONIC.COM HOME PAGE

TO SEND US AN E-MAIL CLICK HERE or GO TO THE HOW TO ORDER PAGE

STARK ELECTRONIC

444 FRANKLIN ST. WORCESTER, MA.