Most if not all of these Channel Master Satellite products are discontinued. I just keep this web page up for reference.
I will try to have some alternative products listed
Satellite IF-VHF/UHF Diplexers
NEW CM # 4014 IFD $24.95 Use this 5 input 4 output Diplexer to add off air TV signal from an antenna on to a 2 LNBF system.
Model 4001 IFD Satellite IF - VHF/UHF Diplexer standard performance (for separating)
Model 4002 IFD Satellite IF - VHF/UHF Diplexer high performance
Model 4032 IFD as Model 40221FD except VHF/UHF DC Pass
The 4001 IFD and 4002 IFD diplexers are used for separating or combining satellite signals at 950-2150 MHz with VHF/UHF signals at 54-806 MHz. They include a high pass filter passing 950-2150 MHz and a low pass filter passing 54-806 MHz. In addition, a DC power pass is provided from the satellite port to the common in order to pass satellite receiver LNB voltage. In voltage switched systems, the receiver LNB voltage is nominally 13V for one polarization and 17V for the other.
The 4001 IFD is Channel Master's standard performance diplexer. This unit is ideal for separating satellite signals from VHF/UHF off-air signals when they are received in the customer's living room on one cable. The satellite signals are then connected to the satellite receiver's 950-2150 MHz input and the VHF/UHF signals are normally connected to the satellite receiver's VHF/UHF input. The satellite receiver then provides A/B switching as appropriate. Model 4OO1 IFD is also available in several wall plate models (see 4003 IFD, 4004 IFD).
The 4002 IFD offers higher performance (much greater stopband rejection) than the 4001 IFD. This is necessary when COMBINlNG satellite and VHF/UHF signals onto one cable because LNB noise extends down into the UHF spectrum and can degrade (add noise to) UHF TV reception if not adequately filtered out before connection to the distribution cable. Model 40121FD is identical except a DC Pass is also provided to the VHF/UHF input to power a preamplifier such as Model OO65DSB which is optimized for operation from a satellite receiver's LNB voltage.
Model 4022 IFD contains two 4002 IFD diplexers and a VHF/UHF signal splitter. When used with a twin LNB, diplexed satellite and VHF/UHF signals are provided to two locations within a building. Model 4032 IFD is identical except DC is passed from one output to the VHF/UHF input for preamplifier power.
4001 IFD 4002 IFD 4032 IFD
SATELLITE IF PORT
Passband 950-2150 950-2150 950-2150 950-2150 950-2150 MHz
Thru Loss 0.8 1.5 1.5 1.5 1.5 dB
Return Loss 10 13 13 13 13 dB
Stopband Attenuation <806 MHz 30 50 50 50 50 dB
DC Pass to In/Out Yes Yes Yes Yes Yes
Number of Ports 1 1 1 2 2
Passband 40-806 40-806 40-806 40-806 40-806 MHz
Thru Loss 0.5 0.8 0.8 4.5 4.5 dB
Return Loss 10 12 12 12 12 dB
950MHz 10 40 40 40 40 dB
1000MHz 16 45 45 45 45 dB
1100MHz 30 50 50 50 50 dB
DC Pass to In/Out No No Yes No Yes
Number of Ports 1 1 1 l 1
lmpedance 75 75 75 75 75 ohm
Number Inputs 1 2 2 3 3
Number Outputs 2 1 1 2 2
DIPLEXERS ARE HANDY IN DSS AND ANTENNA SYSTEMS. SEE DIAGRAM BELOW . A GOOD WAY TO USE DIPLEXERS TO JOIN IN A DSS SIGNAL FROM A RECEIVER RUN INTO A UHF MODULATOR AND THEN RUN INTO A MATV SYSTEM
OTHER CM DIPLEXERS >>>
BACK TO CM DSS INDEX PAGE >>>
Satellite TV Meters
Pico Macom SPI14182150 4002150MHz Satellite Inline Power Inserter (SPI14 182150)
MORE ELECTRONIC PRODUCTS IN OUR AMAZON STORE Many hard to find electronic related products at good prices
RETURN TO STARKELECTRONIC.COM HOME PAGE
444 FRANKLIN ST. WORCESTER, MA.01604
CALL 508-756-7136 MON-FRI 8:30-5PM EASTERN TIME
WE SHIP UPS ANYPLACE IN USA
TO ORDER PHONE, FAX, OR We also have a secure way you can send payment online via PayPal
PHONE 508-756-7136 FAX 508-756-5752 SEND US AN E-MAIL
SEE OUR NEW CLOSE OUT SALES PAGE