8002IFD Dual LNB Power Supply Injector - 13 and 18V includes Model 8014IFD Power Supply
8004IFD Quad LNB Power Supply Injector - 13 and 18V includes Model 8014IFD Power Supply
Most if not all of these Channel Master Satellite products are discontinued. I just keep this web page up for reference.
I will try to have some alternative products listed
The 8002IFD is a dual LNB power supply for use with twin voltage switched LNBs. It supplies 13V regulated to one LNB output and 18V regulated to the other. It is constructed in two parts. The first part is a standard wall plug power supply, which has an output of approximately 24VDC unregulated. This is connected to the dual power injector section. Here, the 24V is regulated down to 13V and 18V. These voltages are added to the LNB input lines. The output lines are DC blocked. The total current drawn by both LNB inputs should not exceed 600 mA. A block diagram of the unit is shown in Fig. 1
The unit is intended for use in SMATV systems where it is not desirable to power the LNB from the satellite receiver. It is also ideal for powering line amplifiers.
In US DBS applications using a twin switched LNB, RHCP is selected when the LNB voltage is nominally 13V and LHCP is selected when the LNB voltage is nominally 18V.
Passband 950-2050 MHz
Insertion Loss 0.5 dB
Impedance 75 ohm
Return Loss 17 dB
Cross-Polar Isolation -50 dB
LNB A voltage 18.0V regulated
LNB B Voltage 13.0V regulated
Maximum Current 600 mA LNB A + LNB B
Connectors RF Type F female
Replacement Power Supply 24 VDC, 600 mA
8014IFD Wall Plug Power Supply
Model 8014IFD $15.95 is used in many Channel Master products such as multiswitches, headend amplifiers and LNB power supplies. It is available on its own for replacement purposes. Refer to Model 8002IFD (above) for specifications.
MORE ELECTRONIC PRODUCTS IN OUR AMAZON STORE Many hard to find electronic related products at good pricesRETURN TO STARKELECTRONIC.COM HOME PAGE
444 FRANKLIN ST. WORCESTER, MA.