CHANNEL MASTER Satellite Signal Level Meters #1004IFD, 1007IFD, 1008IFD

1008 IFD SALE $129 Regular $232

Dual Satellite Signal Level Meter - deluxe model with 13/18V battery pack and charger. This meter lets you aim 2 satellite dishes more easily by being able to observe meter swings on 2 separate meters ( one for each dish ) at the same time.

Satellite Signal Level Meters (New 22KHz Tone Switching Units 1007IFD & 1008IFD

1008IFD Meter Manual

[Image]

1007 IFD Satellite Signal Level Meter - deluxe model with 13/18V battery pack and charger

SALE PRICE $95 Reg. $175.76

View Cart

The 1004IFD, 1007IFD and 1008IFD are intended to aid in the alignment of a satellite dish. They include satellite IF (950-2150 MHz) amplification and a broadband detector. The detector drives a meter and a variable frequency audio tone. The dish is then aligned for maximum meter deflection or highest pitch tone. A gain control allows a wide range of input signal levels. The units are connected to the LNB via a short coaxial cable. The 1004IFD output must be connected to the satellite receiver in order to supply power. The units operate from 11-24 VDC on the coaxial cable. Connection to the receiver is optional with the 1007IFD and 1008IFD but extends battery life between charges. All models allow measurement of voltage on the coaxial cable. The 1007IFD and 1008IFD will also measure LNB current. The 1007IFD and 1008IFD includes an internal rechargeable nicad battery pack, carrying strap and a wall plug recharging unit. The internal battery pack allows a dish to be aligned before it is connected to the satellite receiver. The battery pack is switchable between 13 and 18V output, allowing either polarization to be selected when used with a voltage switched LNB. In US DBS applications, LHCP is selected when the LNB voltage is nominally 17V. Certain commonly used spare parts are available from Channel Master Sales as indicated by model numbers below.

The 1008IFD includes two meters in one housing, allowing easy alignment of dual satellite single dish installations. When peaking, the dish signal level can be viewed for both LNBs simultaneously, making alignment quick and easy. Carrying case included.

INSTRUCTION SHEET

1004 IFD Satellite Signal Level Meter - standard model ON SALE $54 regular $70.32 BACK IN STOCK

View Cart

PERFORMANCE SPECIFICATIONS

All models

Frequency Range 950-2150 MHz

Impedance 75 ohm

Connectors Type F female

1004IFD 1007IFD 1008IFD

Audio Tone Yes Yes Yes

LNB Voltage Measurement Yes Yes Yes

LNB Current Measurement No Yes Yes

22KHz Tone Switching N/A Yes Yes

Insertion Loss 4.5 4.5 4.5 dB

Input Level Range -30 to +4 -30 to +4 -30 to +4 dBm 1 transponder

-39 to -5 -39 to -5 -39 to -5 dBm 8 transponders

-42 to -8 -42 to -8 -42 to -8 dBm 16 transponders

Dimensions HxWxD 3.6”x5.8”x2.8”
(92x147x72mm) 3.5”x6”x4.5”
(89x152x114mm) 4.9”x7”x3.8”
(124x177x96mm)

Weight 17 oz. (482g) 37 oz. (1040g) 42 oz. (1176g)

Wall Plug Charging Voltage N/A 24 24 VDC

Battery Capacity N/A 600 600 mAhours

Battery Life N/A 3.0 1.5 hours between charges

Available Spare Parts

Meter Movement (Rev. A) 45-13140 45-13141 45-13141

Meter Movement (Older Models) 45-13122 45-13124 N/A

Gain Potentiometer 45-13127 45-13127 45-13127

Nicad Battery Pack N/A 45-13125 45-13125

Wall Plug Charger N/A 45-13126 45-13126

BACK TO INDEX PAGE #1

I only have the perfetvision at this time because ASKA is on B/O but it is the same

[Image]

BLONDER TONGUE BTSLM $379 Analog Signal Level Meter

View Cart

The BTSLM is an economical analog signal level meter for measuring analog CATV ( NOT FOR SATELLITE)

channels. The BTSLM has a large 2 x 1 inch back lit LCD display, key pad channel entry and an operating time of 6 hours on its rechargeable batteries. It’s compact size and light weight, plus easy-to-use functionality, make it a perfect instrument for tech’s and network auditors who perform simple system field tests.

• Durable Anti-shock Case• Large Back-lit LCD Display• Energy Saving Automatic turn-off function• 6 Hours Operating Time on Single Charge• Signal Level, C/N, V/A, and AC Voltage Functions

[Image]

The New CableTool model 50# CT-50 $279 from Psiber Data Systems provides contractors, electricians, low voltage installers, or anyone involved in the installation or maintenance of metallic cables with the capability to quickly find faults in cables up to a distance of 2500 feet. Simply select the appropriate cable type from the pre-stored library, attach the leads to two conductors of the cable and with a single press of a button the length of the cable or distance to an open or short is displayed. Voltage on the wires is continuously measured and displayed to warn of a potentially unsafe condition. The CableTool will also inject a tone onto the conductor for tracing cables installed in walls and ceilings with a standard tone probe. The universal banana jack test lead connectors allow for a wide range of adapters for any connector type. The affordable CableTool is an essential tool for anyone in the cabling industry. FULL INSTRUCTIONS THAT COME WITH THE CT-50 AS JPG SCANS

MEASURE: CABLE LENGTH up to 2500 FEET * MEASURE VOLTAGE up to 250 VOLTS * Identify and Find the Distance to an Open or Short in Seconds * Measure Cable Length in a Box, on a Spool or in a Wall * Transmit Tone Signals for Tracing Hidden Cable Runs * Measure Voltage to Identify Live Circuits * Extensive Built-in Library of Cable Types * Compatible with All Common Cables * Displays Length in Feet or Meters

MORE INFORMATION ON NEW CT50 CABLE TESTER,

# CT-50 $279

View Cart

C.M. SATELLITE PARTS PRICE LIST
PART # PRICE PART# PRICE PART# PRICE PART# PRICE

1004IFD $54 1007IFD $95 1008IFD $129 2201IFD $4.88

2202IFD $4.88 2212IFD $5.68 2401IFD $6.96 2404IFD $6.96

2414IFD $7.60 4001IFD $6.00 4002IFD $11.92 5113IFD $6.32

5213IFD $19.20 5224IFD $45 6214IFD $54.24 6228IFD $104.32

6314IFD $63.76 6328IFD $119.92 6344IFD $52.72 8004IFD $42.96

8001IFD $12.62 8002IFD $30.32 8014IFD $15.95

**C.M. SATELLITE PARTS PRICE LIST**
PART #	PRICE	PART#	PRICE	PART#	PRICE	PART#	PRICE
1004IFD	$54	1007IFD	$95	1008IFD	$129	2201IFD	$4.88
2202IFD	$4.88	2212IFD	$5.68	2401IFD	$6.96	2404IFD	$6.96
2414IFD	$7.60	4001IFD	$6.00	4002IFD	$11.92	5113IFD	$6.32
5213IFD	$19.20	5224IFD	$45	6214IFD	$54.24	6228IFD	$104.32
6314IFD	$63.76	6328IFD	$119.92	6344IFD	$52.72	8004IFD	$42.96
		8001IFD	$12.62	8002IFD	$30.32	8014IFD	$15.95

FOR MORE ELECTRONIC PRODUCTS

RETURN TO STARKELECTRONIC.COM HOME PAGE

TO SEND US AN E-MAIL CLICK HERE or GO TO THE HOW TO ORDER PAGE

STARK ELECTRONIC

444 FRANKLIN ST. WORCESTER, MA.

CALL 508-756-7136 FAX 508-756-5752 MON-FRI 8:30-5PM EASTERN TIME

WE SHIP UPS ANYPLACE IN USA

WE ACCEPT Master Card VISA American Express

TO ORDER PHONE, FAX, OR We also have a secure way you can send payment online via PayPal

PHONE 508-756-7136 FAX 508-756-5752

All models
Frequency Range	950-2150 MHz
Impedance	75 ohm
Connectors	Type F female

	1004IFD	1007IFD	1008IFD
Audio Tone	Yes	Yes	Yes
LNB Voltage Measurement	Yes	Yes	Yes
LNB Current Measurement	No	Yes	Yes
22KHz Tone Switching	N/A	Yes	Yes
Insertion Loss	4.5	4.5	4.5	dB
Input Level Range	-30 to +4	-30 to +4	-30 to +4	dBm 1 transponder
	-39 to -5	-39 to -5	-39 to -5	dBm 8 transponders
	-42 to -8	-42 to -8	-42 to -8	dBm 16 transponders
Dimensions HxWxD	3.6”x5.8”x2.8” (92x147x72mm)	3.5”x6”x4.5” (89x152x114mm)	4.9”x7”x3.8” (124x177x96mm)
Weight	17 oz. (482g)	37 oz. (1040g)	42 oz. (1176g)
Wall Plug Charging Voltage	N/A	24	24	VDC
Battery Capacity	N/A	600	600	mAhours
Battery Life	N/A	3.0	1.5	hours between charges

Available Spare Parts
Meter Movement (Rev. A)	45-13140	45-13141	45-13141
Meter Movement (Older Models)	45-13122	45-13124	N/A
Gain Potentiometer	45-13127	45-13127	45-13127
Nicad Battery Pack	N/A	45-13125	45-13125
Wall Plug Charger	N/A	45-13126	45-13126