CHANNEL MASTER 40-2050 MHz Directional Taps FOR DSS SATELLITE

Most if not all of these Channel Master Satellite products are discontinued. I just keep this web page up for reference.

I will try to have some alternative products listed

40-2050 MHz Directional Taps

[Image]

1010IFD 40-2050 MHz 1-way 10 dB tap 1015IFD 40-2050 MHz 1-way 15 dB tap 1020IFD 40-2050 MHz 1-way 20 dB tap

1214IFD 40-2050 MHz 2-way 14 dB tap 1220IFD 40-2050 MHz 2-way 20 dB tap

6418IFD 40-2050 MHz 4-way 18 dB tap

6424IFD 40-2050 MHz 4-way 24 dB tap

2112IFD 40-2050 MHz 1-way 12 dB tap Dual Polarization

The above model numbers describe the Channel Master range of ultra wideband (40-2050 MHz) directional taps. In all cases, the trunk path will pass DC power and the tap is DC blocked. They are used mainly in medium to large distribution systems carrying satellite IF and/or VHF/UHF signals.

Because the internal construction of the 2 and 4-way taps is a 1-way tap followed by a 2 or 4-way splitter, unused outputs should be terminated to achieve optimum flatness, return loss, and isolation. Channel Master terminators, Model 7184 (DC blocked) and Model 7190 (not DC blocked), are recommended.

Model 2112 IFD contains two -12 dB taps in one housing. This is for use in dual polarization distribution networks. It features excellent return loss, thru loss and tap loss characteristics. It is the finest unit of its type and is the unit of choice in dual polarization distribution networks.

PERFORMANCE SPECIFICATIONS

[Image]