The New CableTool model 50 from Psiber Data Systems provides contractors, electricians, low voltage installers, or anyone involved in the installation or maintenance of metallic cables with the capibility to quickly find faults in cables up to a distance of 2500 feet. Simply select the appropriate cable type from the pre-stored library, attach the leads to two conductors of the cable and with a single press of a button the length of the cable or distance to an open or short is displayed. Voltage on the wires is continuously measured and displayed to warn of a potentially unsafe condition. The CableTool will also inject a tone onto the conductor for tracing cables installed in walls and ceilings with a standard tone probe. The universal banana jack test lead connectors allow for a wide range of adapters for any connector type. The affordable CableTool is an essential tool for anyone in the cabling industry.
The New CableTool model 50# CT-50 $299 from Psiber Data Systems provides contractors, electricians, low voltage installers, or anyone involved in the installation or maintenance of metallic cables with the capability to quickly find faults in cables up to a distance of 2500 feet. Simply select the appropriate cable type from the pre-stored library, attach the leads to two conductors of the cable and with a single press of a button the length of the cable or distance to an open or short is displayed. Voltage on the wires is continuously measured and displayed to warn of a potentially unsafe condition. The CableTool will also inject a tone onto the conductor for tracing cables installed in walls and ceilings with a standard tone probe. The universal banana jack test lead connectors allow for a wide range of adapters for any connector type. The affordable CableTool is an essential tool for anyone in the cabling industry. FULL INSTRUCTIONS THAT COME WITH THE CT-50 AS JPG SCANS
MEASURE: CABLE LENGTH up to 2500 FEET * MEASURE VOLTAGE up to 250 VOLTS * Identify and Find the Distance to an Open or Short in Seconds * Measure Cable Length in a Box, on a Spool or in a Wall * Transmit Tone Signals for Tracing Hidden Cable Runs * Measure Voltage to Identify Live Circuits * Extensive Built-in Library of Cable Types * Compatible with All Common Cables * Displays Length in Feet or Meters
MORE INFORMATION ON NEW CT50 CABLE TESTER,
# CT-50 $299
or you can call your order in to 508-756-7136 and pay by MC, Visa, Amex or Discover
Cables can be damaged during or after installation. Typically the
damaged section is hidden from view behind walls, above ceilings or
buried underground. The CABLETOOL uses TDR (Time Domain
Reflectometry) technology to quickly identify an open or a short and
provide the distance to the problem location. Additionally, the tone
generator feature works with standard tone probes so that the exact cable
path can be traced.
MEASURE CABLE LENGTH ON A SPOOL OR INSTALLED
The CABLETOOL makes it easy for installers to know the amount
of cable remaining on a spool or in a box before pulling a run. When
multiple runs are being installed in the same area, the first run can be
measured to accurately determine the total amount of cable required to
complete the job. Checking cable inventory prior to starting a job
eliminates unplanned trips to buy more cable.
EASY TO USE
The CABLETOOL is simple to operate. After turning the unit on, a
cable can be measured or toned with a single push of a button. The full
graphics display provides all the cable and measurement information
together on one screen. The built-in library of over sixty cable types
makes finding the correct cable information easy. The standard banana
jack connectors means that different test leads and adapters are available
from many vendors.
AFFORDABLE
Telephone and CATV companies have used TDRs to find cable
problems for over thirty years. Until recently, this type of tool cost
thousands of dollars. Advances in technology have allowed the
CABLETOOL to provide the capabilities of previous TDRs at a fraction of
the price
INOVATIVE TOOLS INC. SELECT-A-BIT SCREWDRIVERS
