![[Image]](ct50.jpg)
The New CableTool model 50 from Psiber Data Systems provides contractors, electricians, low voltage installers, or anyone involved in the installation or maintenance of metallic cables with the capability to quickly find faults in cables up to a distance of 2500 feet. Simply select the appropriate cable type from the pre-stored library, attach the leads to two conductors of the cable and with a single press of a button the length of the cable or distance to an open or short is displayed. Voltage on the wires is continuously measured and displayed to warn of a potentially unsafe condition. The CableTool will also inject a tone onto the conductor for tracing cables installed in walls and ceiling with a standard tone probe. The universal banana jack test lead connectors allow for a wide range of adapters for any connector type. The affordable CableTool is an essential tool for anyone in the cabling industry. FULL INSTRUCTIONS THAT COME WITH THE CT-50 AS JPG SCANS
MEASURE: CABLE LENGTH up to 2500 FEET * MEASURE VOLTAGE up to 250 VOLTS * Identify and Find the Distance to an Open or Short in Seconds * Measure Cable Length in a Box, on a Spool or in a Wall * Transmit Tone Signals for Tracing Hidden Cable Runs * Measure Voltage to Identify Live Circuits * Extensive Built-in Library of Cable Types * Compatible with All Common Cables * Displays Length in Feet or Meters
# CT-50 $279
or you can call your order in to 508-756-7136 and pay by MC, Visa, Amex or Discover
PINPOINT CABLE DAMAGE
Cables can be damaged during or after installation. Typically the damaged section is hidden from view behind walls, above ceiling or buried underground. The CABLETOOL uses TDR (Time Domain Reflectometry) technology to quickly identify an open or a short and provide the distance to the problem location. Additionally, the tone generator feature works with standard tone probes so that the exact cable path can be traced.
MEASURE CABLE LENGTH ON A SPOOL OR INSTALLED
The CABLETOOL makes it easy for installers to know the amount of cable remaining on a spool or in a box before pulling a run. When multiple runs are being installed in the same area, the first run can be measured to accurately determine the total amount of cable required to complete the job. Checking cable inventory prior to starting a job eliminates unplanned trips to buy more cable.
EASY TO USE
The CABLETOOL is simple to operate. After turning the unit on, a cable can be measured or toned with a single push of a button. The full graphics display provides all the cable and measurement information together on one screen. The built-in library of over sixty cable types makes finding the correct cable information easy. The standard banana jack connectors means that different test leads and adapters are available from many vendors.
AFFORDABLE
Telephone and CATV companies have used TDRs to find cable problems for over thirty years. Until recently, this type of tool cost thousands of dollars. Advances in technology have allowed the CABLETOOL to provide the capabilities of previous TDRs at a fraction of the price. $279
Box Contents: 1 CableTool, 1 BNC Adapter, 1 'T" Coax Adapter, 2 Test Leads, 4 "AA' batteries. Case, and 1 Instruction Manual.
Major Bullets:
- TDR, Volt Meter and Tone Generator in one product
- Measures distance to shorts/opens up to 2500 feet
Over 60 pre-stored standard and four user defined NVP values for accurate length measurements
Measures and displays voltages up to 250 Volts rms
- Transmits a tone onto the line for cable tracing
Standard banana jack connectors are compatible with a wide range of leads
![[Image]](ct50m.jpg)
WIC-1 Wireless Inspection Camera
Let the ECG® Wireless Inspection Camera with LCD Monitor be your eyes and hands while you look inside walls without tearing them apart, search behind appliances and other difficult places for lost items and hundreds of other uses. Allows for easy visual inspections in hard to reach places. Lightweight, handheld design with 3.28 ft. flexible shaft and useful accessories.
Typical applications for the WIC-1 include HVAC inspection, automotive inspection, cable routing, electrical and general contracting, home theater installation, plumbing inspection and anywhere else that you would use a standard borescope
DIGITAL INFRARED THERMOMETER
![[Image]](pict235.jpg)
Pen-style IR thermometer fits easily in a pocket or purse for quick and easy surface temperature measurements.
MORE INFORMATION ABOUT THE POCKET IR THERMOMETER
CRT-12 COAX CABLE TESTER $19.95
Features:
The CRT-12 cable tester is designed to Tone cables allowing quick identification.
This device helps you troubleshoot cable problems by indicating open or short circuits. Tones out the circuit and has a LED indicator shows good or bad connections. Ideal for identifying cables in a multiple dwelling unit. It comes with 12 V battery and F-female splice.
